Free Delivery On orders over £500
Next Day Delivery In the UK
Trade Prices Available And Advice
Instant 0% Finance 98% Approval Rate
Credit Accounts In 24 Hours

Vuba Resin Bound Resin (Rockbind)

In stock
Product Code :
V-RB-122

Vubascape Resinset Resin Only, available in in sizes 1.5kg or 6kg; is simply the pre-weighed resin mix required to bind together the natural aggregate gravel. Each small 1.5kg unit is capable of encapsulating 25kg of aggregate gravel which would cover 1.16m2 @ 12mm thickness, and each 6kg unit is capable of coating 100kg of aggregate, which would cover 4.66m2 @ 12mm thickness.

These Resinset resin bound resin only units are compatible with almost any washed and dried aggregate blend, but be careful to ensure the aggregate size is correct. As a general rule your resin bound surfacing screed should be at least three times as thick as the largest aggregate within blend, to gain sufficient strength. Therefore, for a 2-5mm aggregate we recommend a minimum 15mm thickness.

Once you have mixed the two pre-weighed resin components, a chemical reaction begins to take place and care should be taken to expedite the process. The non UV grade is not light stable and will yellow - this should be taken into consideration when selecting your type.

Each kit is supplied with the following:

1 x Resin (Pre-catalysed)
1 x Activator
1 x Dried Aggregates

The resin is supplied pre-catalysed to no requirement for additional mixing processes. The kit size is 26.625kg, and therefore will fit handily into most builders tubs. The kit can be mixed using a standard 'plasterers drill and paddle' - no requirement to hire a forced action mixer.

This handy DIY Resin Bound Kit is perfect for the DIY user or even professionals for smaller areas - no more messing around splitting units of resin bound on site. The coverage rates are as follows:

12mm = 1.25m2 per kit (Foot and Light Traffic)
15mm = 1m2 per kit (Vehicle Traffic)
18mm = 0.75m2 per kit (Very Heavy Vehicle Traffic)

Vubascape Resinset Resin Only, available in in sizes 1.5kg or 6kg; is simply the pre-weighed resin mix required to bind together the natural aggregate gravel. Each small 1.5kg unit is capable of encapsulating 25kg of aggregate gravel which would cover 1.16m2 @ 12mm thickness, and each 6kg unit is capable of coating 100kg of aggregate, which would cover 4.66m2 @ 12mm thickness.

These Resinset resin bound resin only units are compatible with almost any washed and dried aggregate blend, but be careful to ensure the aggregate size is correct. As a general rule your resin bound surfacing screed should be at least three times as thick as the largest aggregate within blend, to gain sufficient strength. Therefore, for a 2-5mm aggregate we recommend a minimum 15mm thickness.

Once you have mixed the two pre-weighed resin components, a chemical reaction begins to take place and care should be taken to expedite the process. The non UV grade is not light stable and will yellow - this should be taken into consideration when selecting your type.

Special Price £12.71 £15.25
(Buying a lot? Contact us for prices!)
(Buying a lot? Contact us for prices!)
0.00

Size

1.5kg

33.75

Size

6kg

0.00

UV Stability

Non UV Stable

5.75

UV Stability

UV Stable (1.5kg) + £5.75

56.75

UV Stability

UV Stable (6kg) + £56.75

Vuba Resin Bound Resin (Rockbind)

Product Code :
V-RB-122

Vubascape Resinset Resin Only, available in in sizes 1.5kg or 6kg; is simply the pre-weighed resin mix required to bind together the natural aggregate gravel. Each small 1.5kg unit is capable of encapsulating 25kg of aggregate gravel which would cover 1.16m2 @ 12mm thickness, and each 6kg unit is capable of coating 100kg of aggregate, which would cover 4.66m2 @ 12mm thickness.

These Resinset resin bound resin only units are compatible with almost any washed and dried aggregate blend, but be careful to ensure the aggregate size is correct. As a general rule your resin bound surfacing screed should be at least three times as thick as the largest aggregate within blend, to gain sufficient strength. Therefore, for a 2-5mm aggregate we recommend a minimum 15mm thickness.

Once you have mixed the two pre-weighed resin components, a chemical reaction begins to take place and care should be taken to expedite the process. The non UV grade is not light stable and will yellow - this should be taken into consideration when selecting your type.

Vubascape Resinset Resin Only, available in in sizes 1.5kg or 6kg; is simply the pre-weighed resin mix required to bind together the natural aggregate gravel. Each small 1.5kg unit is capable of encapsulating 25kg of aggregate gravel which would cover 1.16m2 @ 12mm thickness, and each 6kg unit is capable of coating 100kg of aggregate, which would cover 4.66m2 @ 12mm thickness.

These Resinset resin bound resin only units are compatible with almost any washed and dried aggregate blend, but be careful to ensure the aggregate size is correct. As a general rule your resin bound surfacing screed should be at least three times as thick as the largest aggregate within blend, to gain sufficient strength. Therefore, for a 2-5mm aggregate we recommend a minimum 15mm thickness.

Once you have mixed the two pre-weighed resin components, a chemical reaction begins to take place and care should be taken to expedite the process. The non UV grade is not light stable and will yellow - this should be taken into consideration when selecting your type.

Build Your Product

Select Size (Edit)

This is a required field.

1.5kg

6kg

UV Stability (Edit)

This is a required field.

Non UV Stable

UV Stable (1.5kg) + £5.75

UV Stable (6kg) + £56.75

Application Photos

More Information
Prod Name Vubascape Resinset
Size 1.5kg or 6kg
Composition Polyurethane Two Pack Resin
Appearance Clear
Availability 1-2 days
Durability Vey Heavy Duty
Thickness From 12-20mm depending upon application
Substrates Almost any sound, solid surface - concrete, Tarmac, solid paving, asphalt, GRP.
Ambient Temperature 7-30 degrees
Drying Time 3-8 Hours Pedestrian 24-48 hrs heavy
Application Ensure the surface is clean, dry and free from contamination. Mix both parts of the polyurethane resin binder, and expedite application process once mixing is complete.
Product Parts Resin A and Activator B
Primer Required No
Technical Data Please refer to the Resinset data sheet available in 'Download Datasheets' tab
Coverage Dependent upon thickness. 1.5kg Resinset unit will cover 1.16m2 at 12mm when combined with 25kg of aggregate, and 6kg of Resinset will cover 4.66m2 at 12mm when combined with 100kg of aggregate.
Typical Installations Act as a resin binder for natural and synthetic aggregates and gravel.

Video Tutorials

Resinset Resin Only faq's

  • How far does one of the resin bound go?
    Each unit when mixed with 100kg of gravel covers varying degress depending upon mm thickness: 4.66m2 at 12mm (Pedestrian Traffic), 3.73m2 at 15mm (Vehicle Traffic) and 3.11m2 at 18mm (Heavy Vehicle Traffic). 
  • How long will Vubascape Resinset last?
    Resinset, applied correctly, is given a 10 year warranty, and life expectancy of the surfacing screed is even more - 15+ years not being uncommon. 
  • How should I mix Resinset?
    This is the large kit, designed to be mixed with 100kg of Resinset Gravel, so must be mixed in a large pan forced action mixer. Mixing in a cement mixer, or using a drill and paddle will not be successful in fully dispersing the resin around the aggregate. Incorrect mixing may lead to resin pooling and degradation of the screed. 
  • What is the shelf life of this product?
    The unopened shelf life is 12 months. Once opened, the product should be used within 2 weeks. 0 pot life after mixing resin.
  • What colour is the Resinset resin only?
    Resinset cures to a clear finish. Resinset Standard when exposed to UV light will yellow therefore change the appearance of the Resin Bound system, Resinset UVR will remain clear and not yellow when exposed to the UV light.
  • Is Resinset resin bonded or bound, or even bounded surfacing?
    Resinset is trowel applied to a flat and semi smooth aggregated finish, from 12 to 18mm thickness. For additional slip resistance, it is possible to scatter glass beads or anti slip silica into the trowelled surface. Bonded is applied at 2-5mm nominal thickness using the broadcast method, to produce a highly profiled finish.
  • How do I apply this resin bound screed?
    You can use a screeding bar or large level to pull the aggregate back and spread. The final finish should be applied using a clean trowel. We recommend applying area markers on your floor area so you can correctly identify the coverage and therefore thickness it is being applied at. 
  • How long before I can traffic the Resinset once applied? 
    Light traffic after 24 hours, heavy traffic after 48 hours. 
Guaranteed 24 Hour Answer
Have a Question?
Need more information about this resin bound resin pack...
  • Thank you for submitting your query!

    We will do our best to handle and respond to it as soon as possible.