All the DIY products are designed to be mixed with a drill and paddle. Each consists of a Resin Kit, with a Part A and Part B to mix together, and a bag of Aggregates. The aggregates have been specially washed, sized graded and dried for use in Resin Bound Surfacing.
The difference between the two ranges is that the Wonders of the World Driveable DIY Kits are a fully blended range of sizes from 0.4mm to 5mm or 6mm, and are strong enough to withstand vehicle traffic. These are then mixed with a Resin Kit, and applied using a steel trowel.
The second range is simply one 25kg complete bag of washed and dried aggregates with a Resin Kit and applied in the same way. Because the aggregate within this kit isn't blended, these kits should only be used for pathways and patios etc.
These kits are a cheap way of trying Resin Bound Surfacing without the need to buy any specialist equipment, and to take on solo projects. Despite being a DIY Kit, both versions are made using the same high performing Valtex resin as in our Trade Kits, and to the same high strength ratio.
Each kit will cover approximately 1m2 at 15mm and 1.25m2 at 12mm. We recommend to apply this surfacing at 15mm if it is to receive regular traffic.
So for less than £30 per m2 including VAT and Delivery, there's no reason not to try out resin bound surfacing for yourself.