Vuba Rejuvenator

In stock
Product Code:
V-RJ-146
best sellers

Build Your Product

Select Size (Edit)

This is a required field.

5 Litres

£80.00 £96.00
0.00

Size

5 Litres

best sellers

Vuba Rejuvenator is a single part, low viscosity fast drying polyurethane resin sealer designed to improve cleabaility and limit porosity of the stone against staining. Rejuvenator will also improve colour and tone of resin bound and bonded surfacing. 

Rejuvenator is not intended to be used to strengthen screeds, or significantly change the appearance. For a strengthening sealer we would recommend our two part polyurethane strengthening sealer, Resiseal. Resiseal is available in 8.5kg kit sizes. 

Rejuvenator is available in 5 litre unit sizes. Each 5 Litre unit will cover approximately 20-40m2 depending upon the porosity of the floor surface, and application sheet. 

Rejuvenator is touch dry in 2 hours but should not be trafficked for 24-48 hours until it has reached full cure. The uncured, tacky sealer will hold dirt if trafficked too soon. Curing time is temperature dependent. 

Rejuvenator is supplied in a 5 litre kit. Rejuvenator is a single part, low viscosity polyurethane resin sealer.

Rejuvenator is available in 5 litre unit sizes. Each 5 Litre unit will cover approximately 20-40m2 depending upon the porosity of the floor surface, and application sheet.

Application instructions for our water based sealer for bonded and bound systems: 1) Ensure the resin bound or resin bonded system is fully cured before the sealer is applied. 2) Agitate the container to ensure the sealer is mixed. 3) Apply sealer using a medium pile roller from a scuttle (do not pour onto surface or you will not achieve coverage rate) 4) Apply one thin even coat to the surface and allow to cure. 5) The coverage rate is 6-10m2 per litre depending upon porosity of application.

More Information
Prod Name Vuba Resin Bonded and Bound Rejuvenator
Size 5 Litres or 15 Litres
Composition Single Pack Acrylic Sealer
Appearance Matt or Gloss
Durability Very Heavy Duty
Substrates Resin Bonded or Resin Bound Surfacing
Ambient Temperature Above 10oC
Drying Time 2-3 hours in good conditions
Product Parts 1
Coverage 6-10m2 per litre dependent upon usage
Typical Installations On to resin bonded or resin bound screeds