Free Delivery On orders over £500
Next Day Delivery In the UK
Trade Prices Available And Advice
Instant 0% Finance 98% Approval Rate
Credit Accounts In 24 Hours

Vuba Metallic Floor Sealer in Single Colours (Molten Metal Sealer Kits)

In stock
Product Code :
V-MMK-178

The ESSENTIALS Metallic Floor Sealers are individual metallic floor colours. These colours will not create a dramatic 'metalic' effect when applied singularly, but you can purchase multiple and apply in contrast to each other to create an enviable finish!

Our metallic floor sealers are compatible with almost every base imaginable! They can be applied on to existing painted surfaces, primed floors, or even non standard products such as over penny floors or bar tops! There is no limitations with our metalic sealers.

The resin components are two part resin materials, designed to be hardwearing and long lasting. These metallic floor kits kits have been specially developed after years of research - we hope you enjoy them as much as we have trialling and creating them!

All of our metallic pigments and blends are unique to Vuba, manufactured and created by us at our factory in East Yorkshire.

Each 2.5 Litre kit contains 2 units, each of which contains 2 parts.

Unit 1: Contains Part A (Resin with metallic pigment) and Part B (Activator)
Unit 2: Contains Part A (Resin with metallic pigment) and Part B (Activator)

Each unit will contain a contrasting pigment, to make the final metallic finish you can see in the swatch. The blending of these metallic pigmented resins is in the application process and the result will be dependent upon the skill and technique of the applicator.

Each 2.5 Litre kit will cover approximately 5m2. Coverage is dependent upon porosity of substrate and application technique. For optimal results, we would recommend a coverage of approximately 5m2 per 2.5 litres.


Product Calculator
=

The Vuba Metallic Sealer is are applied in a variety of methods, depending upon the result you would like to achieve. Here are some possiblities:

1) Directly on to Concrete
We would recommend you prime the concrete first using an epoxy primer such as Epiprime, so to prevent absorption into the concrete, and excess air bubbles. Be careful to note some epoxy primers, such as liquid damp proof membranes, are tinted to a colour.

2) On to a Single Colour Epoxy Base
Most applications will be applied on to an epoxy floor coating base, such as Ultracoat or Epoxyshield. The base colour will compliment the translucent metallic sealer coats.

3) On to Liquid Motion Base
For an extra dramatic effect, you can have the Liquid Motion Kit as a base...a combination of epoxy colours swirled into a marble type finish. This creates a fantastic base for the sealers.

For any of the options above, you would carry out the same process:

1) Ensure the surface to be applied on to is clean, dry and free from contamination.
2) The kit comes as a 2.5 Litre units, which is 2 part. Separate the components out so you're sure of what it is you're mixing.
3) Each kit will have a Part A and a part B. The Part A contains the metallic pigment. Mix the Part B into the Part A tin.
4) Apply using a spatula, squeegee, trowel or roller depending upon the desired finish. Further apply any other metallic colours you desire to create the contrasting, beautiful finish!
5) Blow lightly with a heat source to help remove air bubbles, and leave to cure for 24 to 48 hours (temperature dependent).

£70.83 £85.00
(Buying a lot? Contact us for prices!)
(Buying a lot? Contact us for prices!)
0.00

Product

2.5 Litres Metallic Sealer

0.00

Colours

Beige

0.00

Colours

Blue

0.00

Colours

Bronze

0.00

Colours

Brown

0.00

Colours

Dark Grey

0.00

Colours

Green

0.00

Colours

Red

0.00

Colours

Silver

0.00

Colours

White

0.00

Colours

Yellow

  • Arrange a Call Back

Vuba Metallic Floor Sealer in Single Colours (Molten Metal Sealer Kits)

Product Code :
V-MMK-178

The ESSENTIALS Metallic Floor Sealers are individual metallic floor colours. These colours will not create a dramatic 'metalic' effect when applied singularly, but you can purchase multiple and apply in contrast to each other to create an enviable finish!

Our metallic floor sealers are compatible with almost every base imaginable! They can be applied on to existing painted surfaces, primed floors, or even non standard products such as over penny floors or bar tops! There is no limitations with our metalic sealers.

The resin components are two part resin materials, designed to be hardwearing and long lasting. These metallic floor kits kits have been specially developed after years of research - we hope you enjoy them as much as we have trialling and creating them!

All of our metallic pigments and blends are unique to Vuba, manufactured and created by us at our factory in East Yorkshire.

Each 2.5 Litre kit contains 2 units, each of which contains 2 parts.

Unit 1: Contains Part A (Resin with metallic pigment) and Part B (Activator)
Unit 2: Contains Part A (Resin with metallic pigment) and Part B (Activator)

Each unit will contain a contrasting pigment, to make the final metallic finish you can see in the swatch. The blending of these metallic pigmented resins is in the application process and the result will be dependent upon the skill and technique of the applicator.

Each 2.5 Litre kit will cover approximately 5m2. Coverage is dependent upon porosity of substrate and application technique. For optimal results, we would recommend a coverage of approximately 5m2 per 2.5 litres.


Product Calculator
=

The Vuba Metallic Sealer is are applied in a variety of methods, depending upon the result you would like to achieve. Here are some possiblities:

1) Directly on to Concrete
We would recommend you prime the concrete first using an epoxy primer such as Epiprime, so to prevent absorption into the concrete, and excess air bubbles. Be careful to note some epoxy primers, such as liquid damp proof membranes, are tinted to a colour.

2) On to a Single Colour Epoxy Base
Most applications will be applied on to an epoxy floor coating base, such as Ultracoat or Epoxyshield. The base colour will compliment the translucent metallic sealer coats.

3) On to Liquid Motion Base
For an extra dramatic effect, you can have the Liquid Motion Kit as a base...a combination of epoxy colours swirled into a marble type finish. This creates a fantastic base for the sealers.

For any of the options above, you would carry out the same process:

1) Ensure the surface to be applied on to is clean, dry and free from contamination.
2) The kit comes as a 2.5 Litre units, which is 2 part. Separate the components out so you're sure of what it is you're mixing.
3) Each kit will have a Part A and a part B. The Part A contains the metallic pigment. Mix the Part B into the Part A tin.
4) Apply using a spatula, squeegee, trowel or roller depending upon the desired finish. Further apply any other metallic colours you desire to create the contrasting, beautiful finish!
5) Blow lightly with a heat source to help remove air bubbles, and leave to cure for 24 to 48 hours (temperature dependent).

Build Your Product

Product (Edit)

This is a required field.

2.5 Litres Metallic Sealer

Select Colours (Edit)

This is a required field.

Beige

Blue

Bronze

Brown

Dark Grey

Green

Red

Silver

White

Yellow

2005-2018 Vuba Building Products Limited, Units B3-B4, Grovehill Industrial Estate, Beverley, HU17 0LF. eCommerce by Icecube Digital