Free Delivery On orders over £500
Next Day Delivery In the UK
Trade Prices Available And Advice
Instant 0% Finance 98% Approval Rate
Credit Accounts In 24 Hours

Vuba Epoxy Flake Floor Paint Kit (Liquid Vinyl)

In stock
Product Code :
V-LVFP-140

The Vuba COSMIC WANDERLUST Epoxy Flake Floor Coating kit (Part of our Liquid Vinyl range) is a fantastic way to finish a floor anywhere from a garage to a commercial canteen or offices.

This kit contains the COSMIC WANDERLUST Range of flakes. Vuba COSMIC WANDERLUST Flake Range is a selection of specialist PVA Flake and Metallic blends, also known as Chip Blends or Fleck Blends. The Vuba COSMIC WANDERLUST Range is used to enhance any floor coating or resin floor system!

The epoxy flake floor coating kit is designed to give an exceptionally decorative and attractive floor finish whilst maintaining all of the abrasion and chemical resistance of an industrial epoxy floor coating!

Flake floor coating systems are hugely popular with our friends over in the USA. They have largely pioneered the decorative epoxy floor coating market, which has flourished due to their availbility and relative low cost. This is where the Vuba Epoxy Floor Coating Kit comes in!

We call our flake floor coating systems Liquid Vinyl because when we first installed the system in our warehouse almost 10 years ago, most visitors assumed the floor was in fact a vinyl! Even to the extent a builder attempting to 'take it up' one day when refurbishing our offices but couldn't find the edge!

The kit consists of an optional epoxy primer; epoxy floor coating Ultracoat, COSMIC WANDERLUST Flakes and an optional sealer coat Duraseal PU. The overall kit is sufficient to cover 20m2 in its entirety - see product composition and coverage rates for more details.

The final finish is exceptionally durable and very attractive. Perfect for vets, offices, corridors, canteens, receptions - basically any other area where you'd like the attractive finish of a vinyl floor but worried it will lift with the use of heavy traffic and water ingress.

The kit contains as a standard, the following:

2 x 5kg Ultracoat (Epoxy Floor Coating)
5 x 1kg COSMIC WANDERLUST Flakes

You can then add the following as optional:

1 x 5kg Epiprime (Epoxy floor primer)
1 x 2.5kg Duraseal in Matt / Silk / Gloss


Everything is designed to cover an area of 20m2. So if you chose the whole kit, it would be as follows:

1 x 5kg Epiprime (this will easily cover 20m2, and allows for porous floors)
1 x 5kg Ultracoat (this is your base layer of epoxy, and will cover 20m2 but not with much excess)
1 x 5kg Ultracoat (this is the layer of epoxy that the flakes will bond to, this will cover easier due to the layers beneath)
5 x 1kg Flakes (this is enough to cover the floor surface at approximately 50% coverage - for sparce coverage you will have lots left over, and for a 'full blind' you will need to select that option to add an additional amount of flakes to your order).
1 x 2.5kg Duraseal (this is enough sealer to apply a thin layer of UV stable scratch resistant sealer over the surface. You can purchase another Duraseal product separately should you wish to apply 2 coats.

And that is your completed Vuba epoxy flake floor coating kit! We hope you have fun, and it looks as incredible as we know it will be!

Product Calculator
=

For such a fantastic looking finish, all of our Liquid Vinyl Kits are relatively easy to install - if you follow our instructions!

1) Suitably prepare your floor ready to receive an epoxy coating. We have instructional videos on our Clever Resin Products at Vuba Youtube Channel, or you can see a datasheet for this in downloads.
2) Apply an epoxy primer if required - we'd recommend an epoxy primer on either highly porous surfaces such as old, worn concrete, or surfaces which lack porosity (and therefore ability to bond to the coating) such as tiles, or power float concrete.
3) Apply a base coat of high build epoxy coating, Ultracoat to give a solid colour base. Each of these phases is separated by overnight curing times.
4) Apply the second coating of epoxy which is to receive the flake system - apply the epoxy coating and walk back on to the surface with the flakes to broadcast on to the surface.
5) Allow the flake system to cure overnight. And when cured, for PVA flakes you can lightly de-nib the surface using sanding paper and leave in that state. Alternatively, you can follow the next step.
6) To apply a UV stable scratch resistant sealer coat, you can apply our Duraseal sealer over the top, available in gloss, silk and matt.
7) And now you're good to go - in most instances this Liquid Vinyl Kit will last 10+ years before de-lamination.

£194.46 £233.35
(Buying a lot? Contact us for prices!)
(Buying a lot? Contact us for prices!)
0.00

Wanderlust Range

Aspen Colorado

0.00

Wanderlust Range

Colombo Fort

0.00

Wanderlust Range

Elizabeth Castle

0.00

Wanderlust Range

Forest Gateau

0.00

Wanderlust Range

Galway City

0.00

Wanderlust Range

Lime Clay Island

0.00

Wanderlust Range

Marrakesh

0.00

Wanderlust Range

Medellin

0.00

Wanderlust Range

Nairobi Dawn

0.00

Wanderlust Range

New York Fall

0.00

Wanderlust Range

Nordic Sail

0.00

Wanderlust Range

Norweigan Forest

0.00

Wanderlust Range

Odessa

0.00

Wanderlust Range

Palazzo Vecchio

0.00

Wanderlust Range

Plaza de Toros

0.00

Wanderlust Range

Rockies

0.00

Wanderlust Range

Seattle Subway

0.00

Wanderlust Range

Trevi Fountain

0.00

Wanderlust Range

Venice Basilica

0.00

Wanderlust Range

Zion Park

0.00

Cosmic Range

Altair

0.00

Cosmic Range

Amber (Large)

0.00

Cosmic Range

Antares

0.00

Cosmic Range

Bellatrix

0.00

Cosmic Range

Canopus

0.00

Cosmic Range

Capella

0.00

Cosmic Range

Gold (Large)

0.00

Cosmic Range

Gold (Small)

0.00

Cosmic Range

Havana (Large)

0.00

Cosmic Range

Rigel

0.00

Cosmic Range

Silk (Large)

0.00

Cosmic Range

Silver (Large)

0.00

Cosmic Range

Silver (Small)

0.00

Cosmic Range

Sirius

0.00

Cosmic Range

Vega

0.00

Cosmic Range

Wisconsin (Large)

0.00

Cosmic Range

Wisconsin (Small)

0.00

Cosmic Wanderlust Range

Aspen Colorado

0.00

Cosmic Wanderlust Range

Colombo Fort

0.00

Cosmic Wanderlust Range

Elizabeth Castle Correct

0.00

Cosmic Wanderlust Range

Forest Gateau

0.00

Cosmic Wanderlust Range

Galway City

0.00

Cosmic Wanderlust Range

Lime Clay Island

0.00

Cosmic Wanderlust Range

Marrakesh

0.00

Cosmic Wanderlust Range

Medellin

0.00

Cosmic Wanderlust Range

Nairobi Dawn

0.00

Cosmic Wanderlust Range

New York Fall

0.00

Cosmic Wanderlust Range

Nordic Sail

0.00

Cosmic Wanderlust Range

Norweigan Forest

0.00

Cosmic Wanderlust Range

Odessa

0.00

Cosmic Wanderlust Range

Palazo Vecchio

0.00

Cosmic Wanderlust Range

Plaza de Toros

0.00

Cosmic Wanderlust Range

Rockies

0.00

Cosmic Wanderlust Range

Seattle Subway

0.00

Cosmic Wanderlust Range

Trevi Fountain

0.00

Cosmic Wanderlust Range

Venice Basilica

0.00

Cosmic Wanderlust Range

Zion Park

0.00

Colours

Admiral Blue

0.00

Colours

Arctic Blue

0.00

Colours

Ash Grey

0.00

Colours

Cedar Green

0.00

Colours

Charcoal Black

0.00

Colours

Coleman Yellow

0.00

Colours

Gunmetal Grey

0.00

Colours

Ivory White

0.00

Colours

Lemon Yellow

0.00

Colours

Postbox Red

0.00

Colours

Stone Grey

0.00

Colours

York Grey

0.00

Primer Required

No Primer Required £00.00

60.40

Primer Required

Epoxy Floor Primer - Epiprime +£60.40

99.00

Primer Required

Oil Tolerant Primer - Oilguard +£99.00

99.00

Primer Required

Oil Tolerant Primer - Oilguard +£99.00

60.00

Sealer Required

2.5kg Gloss +£60.00

60.00

Sealer Required

2.5kg Matt +£60.00

60.00

Sealer Required

2.5kg Silk +£60.00

0.00

Flake Coverage

25% Coverage

24.80

Flake Coverage

50% Coverage +£24.80

85.20

Flake Coverage

Full Coverage +£85.20

  • Arrange a Call Back

Vuba Epoxy Flake Floor Paint Kit (Liquid Vinyl)

Product Code :
V-LVFP-140

The Vuba COSMIC WANDERLUST Epoxy Flake Floor Coating kit (Part of our Liquid Vinyl range) is a fantastic way to finish a floor anywhere from a garage to a commercial canteen or offices.

This kit contains the COSMIC WANDERLUST Range of flakes. Vuba COSMIC WANDERLUST Flake Range is a selection of specialist PVA Flake and Metallic blends, also known as Chip Blends or Fleck Blends. The Vuba COSMIC WANDERLUST Range is used to enhance any floor coating or resin floor system!

The epoxy flake floor coating kit is designed to give an exceptionally decorative and attractive floor finish whilst maintaining all of the abrasion and chemical resistance of an industrial epoxy floor coating!

Flake floor coating systems are hugely popular with our friends over in the USA. They have largely pioneered the decorative epoxy floor coating market, which has flourished due to their availbility and relative low cost. This is where the Vuba Epoxy Floor Coating Kit comes in!

We call our flake floor coating systems Liquid Vinyl because when we first installed the system in our warehouse almost 10 years ago, most visitors assumed the floor was in fact a vinyl! Even to the extent a builder attempting to 'take it up' one day when refurbishing our offices but couldn't find the edge!

The kit consists of an optional epoxy primer; epoxy floor coating Ultracoat, COSMIC WANDERLUST Flakes and an optional sealer coat Duraseal PU. The overall kit is sufficient to cover 20m2 in its entirety - see product composition and coverage rates for more details.

The final finish is exceptionally durable and very attractive. Perfect for vets, offices, corridors, canteens, receptions - basically any other area where you'd like the attractive finish of a vinyl floor but worried it will lift with the use of heavy traffic and water ingress.

The kit contains as a standard, the following:

2 x 5kg Ultracoat (Epoxy Floor Coating)
5 x 1kg COSMIC WANDERLUST Flakes

You can then add the following as optional:

1 x 5kg Epiprime (Epoxy floor primer)
1 x 2.5kg Duraseal in Matt / Silk / Gloss


Everything is designed to cover an area of 20m2. So if you chose the whole kit, it would be as follows:

1 x 5kg Epiprime (this will easily cover 20m2, and allows for porous floors)
1 x 5kg Ultracoat (this is your base layer of epoxy, and will cover 20m2 but not with much excess)
1 x 5kg Ultracoat (this is the layer of epoxy that the flakes will bond to, this will cover easier due to the layers beneath)
5 x 1kg Flakes (this is enough to cover the floor surface at approximately 50% coverage - for sparce coverage you will have lots left over, and for a 'full blind' you will need to select that option to add an additional amount of flakes to your order).
1 x 2.5kg Duraseal (this is enough sealer to apply a thin layer of UV stable scratch resistant sealer over the surface. You can purchase another Duraseal product separately should you wish to apply 2 coats.

And that is your completed Vuba epoxy flake floor coating kit! We hope you have fun, and it looks as incredible as we know it will be!

Product Calculator
=

For such a fantastic looking finish, all of our Liquid Vinyl Kits are relatively easy to install - if you follow our instructions!

1) Suitably prepare your floor ready to receive an epoxy coating. We have instructional videos on our Clever Resin Products at Vuba Youtube Channel, or you can see a datasheet for this in downloads.
2) Apply an epoxy primer if required - we'd recommend an epoxy primer on either highly porous surfaces such as old, worn concrete, or surfaces which lack porosity (and therefore ability to bond to the coating) such as tiles, or power float concrete.
3) Apply a base coat of high build epoxy coating, Ultracoat to give a solid colour base. Each of these phases is separated by overnight curing times.
4) Apply the second coating of epoxy which is to receive the flake system - apply the epoxy coating and walk back on to the surface with the flakes to broadcast on to the surface.
5) Allow the flake system to cure overnight. And when cured, for PVA flakes you can lightly de-nib the surface using sanding paper and leave in that state. Alternatively, you can follow the next step.
6) To apply a UV stable scratch resistant sealer coat, you can apply our Duraseal sealer over the top, available in gloss, silk and matt.
7) And now you're good to go - in most instances this Liquid Vinyl Kit will last 10+ years before de-lamination.

Build Your Product

Select Primer Required (Edit)

This is a required field.

No Primer Required £00.00

Epoxy Floor Primer - Epiprime +£60.40

Oil Tolerant Primer - Oilguard +£99.00

Oil Tolerant Primer - Oilguard +£99.00

Select Colours (Edit)

This is a required field.

Admiral Blue

Arctic Blue

Ash Grey

Cedar Green

Charcoal Black

Coleman Yellow

Gunmetal Grey

Ivory White

Lemon Yellow

Postbox Red

Stone Grey

York Grey

Cosmic Range (Edit)

This is a required field.

Altair

Amber (Large)

Antares

Bellatrix

Canopus

Capella

Gold (Large)

Gold (Small)

Havana (Large)

Rigel

Silk (Large)

Silver (Large)

Silver (Small)

Sirius

Vega

Wisconsin (Large)

Wisconsin (Small)

Wanderlust Range (Edit)

This is a required field.

Aspen Colorado

Colombo Fort

Elizabeth Castle

Forest Gateau

Galway City

Lime Clay Island

Marrakesh

Medellin

Nairobi Dawn

New York Fall

Nordic Sail

Norweigan Forest

Odessa

Palazzo Vecchio

Plaza de Toros

Rockies

Seattle Subway

Trevi Fountain

Venice Basilica

Zion Park

Cosmic Wanderlust Range (Edit)

This is a required field.

Aspen Colorado

Colombo Fort

Elizabeth Castle Correct

Forest Gateau

Galway City

Lime Clay Island

Marrakesh

Medellin

Nairobi Dawn

New York Fall

Nordic Sail

Norweigan Forest

Odessa

Palazo Vecchio

Plaza de Toros

Rockies

Seattle Subway

Trevi Fountain

Venice Basilica

Zion Park

Flake Coverage (Edit)

This is a required field.

25% Coverage

50% Coverage +£24.80

Full Coverage +£85.20

Select Sealer Required (Edit)

This is a required field.

2.5kg Gloss +£60.00

2.5kg Matt +£60.00

2.5kg Silk +£60.00

Pictorial Guide
More Information
Prod Name Liquid Vinyl Kit - COSMIC WANDERLUST Grade
Composition Epoxy Primer, Epoxy Floor Coating, PVA Flakes and Polyurethane Resin UV Sealer
Appearance Slightly Profiled Flake Finish with a Gloss, Silk or Matt Finish
Availability In Stock
Durability Very Heavy Duty
Thickness 0.5mm
Substrates Concrete, Screed, Asphalt and Most Surfaces (Subject to Correct Epoxy Primer)
Ambient Temperature Above 5oC During Application
Drying Time 12-26 Hours Intercoat and 24 Hours for Usage
Coverage 20m2 per kit
Typical Installations Domestic garages, bars, toilets, changing rooms, canteens and utility rooms etc

Video Tutorials

2005-2018 Vuba Building Products Limited, Units B3-B4, Grovehill Industrial Estate, Beverley, HU17 0LF. eCommerce by Icecube Digital