Vuba Industrial Resurfacing Screed with Concrete Finish (Duratop)

In stock
Product Code:
£30.00 £36.00

Ultra durability cementitious concrete resurfacing screed for levelling and repairing damaged concrete, leaving a smooth and even finish. Vuba concrete resurfacing screed is suitable to be left as a wearing finish subject to internal heavy duty traffic including fork lift trucks. Duratop concrete resurfacer not only repairs, but protects your floor surface from future damage and can also be overcoated if required. See 'Specification' for more details including coverage.
Extras: You must prime first with Vuba-Uniprime and use a spiked roller immediately after application. Browse our Essentials section for trowels, spiked shoes etc.

Vuba-Screed Duratop is a cementitious self-levelling floor topping designed to resurface old, worn and damaged concrete on warehouse and industrial floors when rapid strength and durability are a high priority. This concrete resurfacing screed is suitable to be left as a wearing finish subject to internal heavy duty traffic.

Duratop concrete resurfacing screed is used most commonly as a direct wearing layer in internal industrial and domestic environments. Popularity for use in industrial loading bays and commercial or domestic garages is down to the hard wearing properties offered by this concrete resurfacing screed whilst maintaining excellent self-levelling properties for an attractive finish.

Duratop concrete resurfacing screed is suitable for levelling concrete slabs, rough concrete floors, and cement screeds. For alternative substrate enquiries please contact us first.

More Information
Prod Name Vuba-Screed Duratop
Size 25kg
Composition Protein free, Portland cement based compound
Appearance Smooth natural grey
Availability 1-2 Days
Durability Very heavy duty
Thickness 5-15mm
Substrates Concrete/cement
Ambient Temperature During application and curing 6 degrees minimum
Drying Time 2-3 hrs

Ensure the surface is clean, dry and free of contamination. Prime as per Data Sheet instructions. Onto primer, mix concrete resurfacing screed with water at the rate specified in our Data Sheet and pour out immediately. Trowel/squeegee to spread quickly and pass over with a spiked roller immediately. See technical data sheet in Downloads for detailed guidance.

Primer Required Yes
Technical Data See data sheet in Downloads
Coverage < 3m2 @ 5mm (25kg)
Typical Installations Internal concrete resurfacing in warhouses, factories, garages etc.

Pictorial Guide