Vuba Wetpour Rubber Play DIY Kit

In stock
Product Code :
V-EPDMD-134

The Vuba DIY Rubber Play EPDM Surfacing Kit contains everything you need for a quick and easy DIY installation of EPDM Rubber Surfacing.

The kit is designed to allow you to easily mix and apply your own decorative, soft play area in your garden, nursery, school or public area. The kits are supplied complete with full instructions

The unique part of our kits is that you do not need any special equipment! No need to hire mixers or even hire additional labour. Our kits could be done by a lone competent person, but 2 is always preferbale.

We have two types of binder available for your kit, depending on what you would like:

Option 1: Non-UV Stable Single Part Binder - High Elasticity
Option 2: UV Stable Two Part Resin Binder - Medium Elasticity

Where high degrees of flexibility is most important, along with a low cost, then we would recommend the Non-UV Stable Single Part Binder.

For rubber surfacing that is to be used for mainly decorative purposes - such as at golf courses, outside leisure centres, features in a garden, we would recommend the UV Stable Option.

You choose your binder in the product options to the left. Contact us for any further technical support on 01482 778897.

The kit is 11kg in size:

1 x 1.625kg Resin Binder Kit (Pre-measured to suit)
1 x 9.375kg EPDM Coloured Rubber Granules (Weighed out in a bag)

There is no requirement for any measuring, calculating or additional mixing processes. The kit consists of a 9.375kg bag of EPDM Rubber Granules and 1.625kg of Resin Binder.

There is two options for the Resin Binder Kit:

Option 1: Non-UV Stable Single Part Binder - High Elasticity
Option 2: UV Stable Two Part Resin Binder - Medium Elasticity

Both binder options provide a good level of 'give' in the final system, however, if flexibility is of utmost importance then we would recommend the Non-UV Stable Single Part Binder.

Coverage Rates for an 11kg Kit:
1.2m2 @ 10mm
0.75m2 @ 15mm
0.60m2 @ 20mm
0.30m2 @ 30mm

Despite being only 11kg in size, these kits do have a large volume due to the low density of the rubber and permeability of the final Playbound screed.

How to mix and apply this Vuba Playground Rubber Surfacing Kit:

1) Ensure there is a suitable base for the EPDM Rubber, such as a solid surface or our Basebound rubber base.

2) Pour the EPDM Rubber into a mixing drum.

3) For the UV Stable Binder: Mix both parts separately and pour over the EPDM Rubber. For the Non-UV Binder: Agitate binder and pour over the EPDM Rubber.

4) Mix until fully homogenous using a large drill and paddle.

5) Pour out on to working area, find a level using a screeding bar / straight edge and finish using a clean steel trowel.

TIP: Clean trowel using Vuba Cleaning Solvent to prevent sticking and to aid application.

£42.50 £51.00
(Buying a lot? See below for pricing!)
(Buying a lot? See below for pricing!)
0.00

Comes as...

11kg Kit (1.2m2 at 10mm)

0.00

Colours

Black

4.80

Colours

Black and Green +£4.80

4.80

Colours

Black and Light Grey +£4.80

4.80

Colours

Black and Red +£4.80

4.80

Colours

Black, Light Grey and Ivory +£4.80

0.00

Colours

Blue

0.00

Colours

Blue Grey

0.00

Colours

Brown

0.00

Colours

Golden Yellow

0.00

Colours

Green

0.00

Colours

Grey

0.00

Colours

Ivory

4.80

Colours

Ivory and Navy Blue +£4.80

4.80

Colours

Ivory, Black and Red +£4.80

0.00

Colours

Light Blue

0.00

Colours

Light Green

0.00

Colours

Light Grey

0.00

Colours

Navy Blue

0.00

Colours

Orange

0.00

Colours

Red

0.00

Colours

Yellow

0.00

UV Stability

Non-UV Stable Single Pack Binder (High Flexibility)

9.00

UV Stability

UV Stable Two Part Binder (Medium Flexibility) +£7.50

Vuba Wetpour Rubber Play DIY Kit

Product Code :
V-EPDMD-134

The Vuba DIY Rubber Play EPDM Surfacing Kit contains everything you need for a quick and easy DIY installation of EPDM Rubber Surfacing.

The kit is designed to allow you to easily mix and apply your own decorative, soft play area in your garden, nursery, school or public area. The kits are supplied complete with full instructions

The unique part of our kits is that you do not need any special equipment! No need to hire mixers or even hire additional labour. Our kits could be done by a lone competent person, but 2 is always preferbale.

We have two types of binder available for your kit, depending on what you would like:

Option 1: Non-UV Stable Single Part Binder - High Elasticity
Option 2: UV Stable Two Part Resin Binder - Medium Elasticity

Where high degrees of flexibility is most important, along with a low cost, then we would recommend the Non-UV Stable Single Part Binder.

For rubber surfacing that is to be used for mainly decorative purposes - such as at golf courses, outside leisure centres, features in a garden, we would recommend the UV Stable Option.

You choose your binder in the product options to the left. Contact us for any further technical support on 01482 778897.

The kit is 11kg in size:

1 x 1.625kg Resin Binder Kit (Pre-measured to suit)
1 x 9.375kg EPDM Coloured Rubber Granules (Weighed out in a bag)

There is no requirement for any measuring, calculating or additional mixing processes. The kit consists of a 9.375kg bag of EPDM Rubber Granules and 1.625kg of Resin Binder.

There is two options for the Resin Binder Kit:

Option 1: Non-UV Stable Single Part Binder - High Elasticity
Option 2: UV Stable Two Part Resin Binder - Medium Elasticity

Both binder options provide a good level of 'give' in the final system, however, if flexibility is of utmost importance then we would recommend the Non-UV Stable Single Part Binder.

Coverage Rates for an 11kg Kit:
1.2m2 @ 10mm
0.75m2 @ 15mm
0.60m2 @ 20mm
0.30m2 @ 30mm

Despite being only 11kg in size, these kits do have a large volume due to the low density of the rubber and permeability of the final Playbound screed.

How to mix and apply this Vuba Playground Rubber Surfacing Kit:

1) Ensure there is a suitable base for the EPDM Rubber, such as a solid surface or our Basebound rubber base.

2) Pour the EPDM Rubber into a mixing drum.

3) For the UV Stable Binder: Mix both parts separately and pour over the EPDM Rubber. For the Non-UV Binder: Agitate binder and pour over the EPDM Rubber.

4) Mix until fully homogenous using a large drill and paddle.

5) Pour out on to working area, find a level using a screeding bar / straight edge and finish using a clean steel trowel.

TIP: Clean trowel using Vuba Cleaning Solvent to prevent sticking and to aid application.

Build Your Product

Comes as... (Edit)

This is a required field.

11kg Kit (1.2m2 at 10mm)

Select Colours (Edit)

This is a required field.

Black

Black and Green +£4.80

Black and Light Grey +£4.80

Black and Red +£4.80

Black, Light Grey and Ivory +£4.80

Blue

Blue Grey

Brown

Golden Yellow

Green

Grey

Ivory

Ivory and Navy Blue +£4.80

Ivory, Black and Red +£4.80

Light Blue

Light Green

Light Grey

Navy Blue

Orange

Red

Yellow

UV Stability (Edit)

This is a required field.

Non-UV Stable Single Pack Binder (High Flexibility)

UV Stable Two Part Binder (Medium Flexibility) +£7.50

More Information
Prod Name Playbound
Size 11kg
Composition EPDM Rubber + Resin Binder
Appearance Granulated EPDM Rubber Surface
Durability Highly Durable in Play Areas
Thickness 10mm to 30mm
Substrates Recycled SBR Rubber Base, Concrete or Tarmac
Ambient Temperature Above 5oC During Application
Drying Time 16-24 Hours Temperature Dependent
Typical Installations Play areas, gardens, communal areas and parks.

Video Tutorials

YOU MIGHT ALSO LIKE...