Rejuvenator 10kg - Enhancing Sealer for Resin Bound & Resin Bonded

Product Code
V-RJV-001
100%
(3)

Rejuvenator is a new innovation in resin bound & bonded strengthening technology.

Rejuvenator is a two Part Polyurethane Rejuvenating UVR Resin Sealer, manufactured by Vuba using the same chemical components as a Resin Bound Binder. 

Rejuvenator is a solvent based rejuvenating and renewing sealer for tired and worn resin bound & bonded driveways. Rejuvenator enhances the colour, look and feel of a Resin based driveway. 

The sealer is supplied in two parts, ready for mixing and application using a medium pile roller. We recommend to add 200ml of Accelerex when applying in temperatures less than 10oC.

2 Part 10kg Kit. Each 10kg kit covers 25m2 at a healthy coverage.
£54.99 £65.99

Everything
you need to
know.

Rejuvenator is a new innovation in resin bound & bonded strengthening technology.

Rejuvenator is a two part polyurethane resin sealer, manufactured by Vuba using the same chemical components as a Resin Bound Binder. Rejuvenator is supplied as a 10kg kit. 

Rejuvenator is a solvent based rejuvenating and renewing sealer for tired and worn resin bound driveways. Rejuvenator enhances the colour, look and feel of a Resin based driveway. 

The sealer is supplied in two parts, ready for mixing and application using a medium pile roller. We recommend to add 200ml of Accelerex when applying in temperatures less than 10oC.

10kg covers 25m2 in one 'good' coat. Rejuvenator has a film thickness of 400 microns or 0.4mm. Rejuvenator will not block or reduce permeability of the resin bound system.

We manufacture Rejuvenator in a 10kg kit. 

10kg covers 25m2 in one coat. 

Each Rejuvenator kit is applied liberally to ensure the surface is fully saturated.

Ensure the surface is clean, dry and free from contamination. The surface must be relatively dry or the resin will react with excess moisture to create moisture blooming. This will look like pale foaming on the surface, and will leave an unsightly finish. Ensure the surface is fully dried.

Pour the contents of Activator B in the Resin A tub, and mix using a drill and paddle. The mixing process should take approximately 90 seconds, depending upon the mixing paddle used. If using Accelerex, pour in and mix until homogenous with the rest of the components. 

Once mixed, we would recommend to pour into a scuttle. Do not pour on to the resin bound surface or it will over saturate the area. 

Mark out the area required to apply first, to ensure even distribution. Apply using a medium pile roller, ensuring now to allow pooling.

Ensure you do not traffic the resin bound system whilst it is still tacky. We would recommend Accelerex for application in temperatures less than 10oC. Resiseal takes 24 hours to cure at 20oC, but curing time will be delayed at lower temperatures. 

Rejuvenator is a renewing and rejuvenating product. The efficancy of Rejuvenator depends upon the surface applied to. We cannot provide a warranty for this nature of installation, but we can assure you that Rejuvenator is an extremely high quality UV Stable product. Please provide details of the project looking to be undertaken if you would like us to advise on life expectancy. 

Technical
Specification

More Information
Size 2.5kg or 10kg
Country of Manufacture United Kingdom
UV Resistance / Stability UV Stable Aliphatic Resin
Elongation at Break (%) 70%
Hardness (Shore D) 65 Shore D
Tensile Strength (MPa) 13 MPa
Gasoline/ Diesel Resistance Resistant
Minimum Application Temp 5oC Minimum Application for failure. 10oC Recommended Minimum Application Temperature. Accelerex recommended for temperatures below 15oC.
Suitable Substrates Clean, dry and free from contamination resin bound or bonded surfaces.
Recommended Thickness Apply as per coverage rates.
Curing Schedule Guide 24 Hours at 20oC.
Brand Vuba
Write Your Own Review

Leave us
a Genuine Review and we give
you £10

Leave a review here (including photos if you can) which will help potential customers choose if this is the right product for them, and we will give you £5 as a reward for your help! Also leave us a Trust Pilot or Google Review and we will upgrade you to £10

You will be contacted within 2 working days of submitting your review. You can choose an Amazon voucher or discount from your next order with Vuba. For more details you can email jade.tyson@vubagroup.com.

Your Rating