Resiseal - Strengthening Sealer for Resin Bound & Resin Bonded Surfacing

Product Code
V-RSS-001
100%
(4)

Resiseal is a new innovation in resin bound and bond strengthening technology.

Resiseal is a solvent based high strength sealing and strengthening sealer designed to strengthen and enhance existing resin bound & bonded driveways. Resiseal is supplied as a 10kg kit. 

Manufactured by Vuba, Resiseal is a two part resin system supplied pre-weighed and catalysed, ready to perform.

Mix both parts together and apply using a roller. We recommend to add 18ml of Accelerex when applying in temperatures less than 10oC.

Supplied as a 10kg Kit. 10kg covers 15m2 at a healthy coverage.
£58.32 £69.99

Everything
you need to
know.

Resiseal is a new innovation in resin bound strengthening technology. 

Resiseal is a solvent based high strength sealing and strengthening sealer designed to strengthen and enhance existing resin bound & bonded driveways. 

Manufactured by Vuba, Resiseal is a two part resin system supplied pre-weighed and catalysed, ready to perform. 

Mix both parts together and apply using a roller. We recommend to add 200ml of Accelerex when applying in temperatures less than 10oC.

Resiseal is manufactured as a 10kg kit. Each kit is supplied in two parts, ready to be mixed. We recommend to be applied using a brush and roller. 

We manufacture Resiseal in a 10kg kit. 

10kg covers 15m2 in one coat. 

Each kit is applied liberally to ensure the surface is fully saturated. 

We are a leading manufacturer of resin systems, established in 2009. Resiseal is a Vuba innovation, designed to help repair underbound and poorly performing resin bound & bonded systems. 

By choosing a Vuba product, you are working with a leading ethical, award winning manufacturer in Resin Systems. We only manufacture UV Stable FeRFA Compliant Resin Systems.

Ensure the surface is clean, dry and free from contamination. The surface must be relatively dry or the resin will react with excess moisture to create moisture blooming. This will look like pale foaming on the surface, and will leave an unsightly finish. Ensure the surface is fully dried. 

Pour the contents of Activator B in the Resin A tub, and mix using a drill and paddle. The mixing process should take approximately 90 seconds, depending upon the mixing paddle used. If using Accelerex, pour in and mix until homogenous with the rest of the components. 

Once mixed, we would recommend to pour into a scuttle. Do not pour on to the resin bound surface or it will over saturate the area. 

Mark out the area required to apply first, to ensure even distribution. Apply using a medium pile roller, ensuring now to allow pooling. The resin will sit on the surface and begin to seep into the cavities after 15-20 mins. Oversaturation may remove the permeability of the system.

Ensure you do not traffic the resin bound system whilst it is still tacky. We would recommend Accelerex for application in temperatures less than 15oC. Resiseal takes 24 hours to cure at 20oC, but curing time will be delayed at lower temperatures. 

Resiseal is a repair and strengthening product. The efficacy of Resiseal depends upon the surface applied to. We cannot provide a warranty for this nature of installation, but we can assure you that Resiseal is an extremely high quality product. Please provide details of the project looking to be undertaken if you would like us to advise on life expectancy. 

Technical
Specification

More Information
Size 10kg
Country of Manufacture United Kingdom
UV Resistance / Stability UV Stable Aliphatic Resin
Elongation at Break (%) 70%
Hardness (Shore D) 65 Shore D
Tensile Strength (MPa) 13 MPa
Gasoline/ Diesel Resistance Resistant
Minimum Application Temp 5oC Minimum Application for failure. 10oC Recommended Minimum Application Temperature. Accelerex recommended for temperatures below 15oC.
Suitable Substrates Clean, dry and free from contamination resin bound or bonded surfaces.
Recommended Thickness Apply as per coverage rates.
Curing Schedule Guide 24 Hours at 20oC.
Brand Vuba
Write Your Own Review

Leave us
a Genuine Review and we give
you £10

Leave a review here (including photos if you can) which will help potential customers choose if this is the right product for them, and we will give you £5 as a reward for your help! Also leave us a Trust Pilot or Google Review and we will upgrade you to £10

You will be contacted within 2 working days of submitting your review. You can choose an Amazon voucher or discount from your next order with Vuba. For more details you can email jade.tyson@vubagroup.com.

Your Rating