Wonders of the World Sample Case (Vehicle Traffic)

Product Code

24 Cylindrical Resin Bound Samples attached using a removable velcro with the rear labelled with the name of the sample.

This is our ultimate sample case, containing our most popular blends and 12 samples which are exclusive to Vuba in the UK.

The case contains blends of granite, quartz, flint and marble aggregates. All aggregates have been tested for particle density, water absoprtion and abrasion resistance. And each blend has been tested in line with British Standards for compressive strength.

Unlike other resin bound systems, ours contains a translucent binding quartz which increases strength by up to 30% whilst not discolouring the resin bound system. 

24 Velcro Samples in a Handy Carry Case
£145.00 £174.00

you need to

You don't always have to compete on price. We have transformed the landscape of Resin Bound Surfacing with this palette of covetable Marbles, Flints, Quartz and Granites, may of which exclusively available from Vuba.

With cleaner aggregates, a broader range of greys and fantastic tones and shades, it is easy to understand why Vuba has a repuatation of the largest and most desireable colour range in resin bound surfacing. 

When you order a Resin Bound Sample case you will be contacted by one of our Account Managers who will talk you through the range and provide further advice, support and Trade Prices.

Easihold™ Spray is designed to be sprayed on to decorative stones, as follows:

1. Clear a depth of approximately 20mm in your plant pot or container.
2. Pour in your decorative stones (We recommend Potstars Decorative Stones)
3. From 4-5 inches distance apply Easihold™ Spray. Ensure to protect any plants, pots and working areas. Easihold™ Spray is a highly durable product and difficult to remove when dry!
4. Allow to dry for 6 hours to touch, and 24 hours for full dry.

Remember that Easihold™ Spray is a Single Use Only product, so ensure all the stones you plan to stabilise are ready for a one time application!

If you have more to do, you can always buy another bottle!

Easihold™ Spray is 200ml in size. It is container within a spray bottle. 

The spray bottle has a safety catch which has to be disengaged prior to use, as well as a seal on the nozzle. 

Each bottle is designed for Single Use Only. So ensure all of your stones are ready to be stabilised!

Each bottle of Easihold™ Spray is capable of covering up to 1m2 of decorative stones. Please note, the spray bottle is designed for Single Use Only, so please ensure all of your plants are ready to be sealed!

It’s important you apply Easihold in the right weather conditions. Warm weather and most importantly, dry conditions for the 48 hours after application will give you optimal performance from your Easihold binder.

Easihold is a water based, air drying product. As the water evaporates, our patented Easihold particles crosslink to bond and stabilise your stones! It’s very important Easihold is able to carry out this evaporation process to gain its strength.

When this doesn’t happen – for example in cold conditions or if you have applied too much Easihold and the stones are over saturated; the crosslinking process will not occur, and the final result will be compromised

The stones you use don’t have to be dry upon purchase, but we do recommend washing and letting them dry before use, as some new stones can arrive with a silty deposit. Contamination like this will prevent a strong bond being achieved between your stones. If you’re using existing stones, try to remove any dirt or debris prior to application, and leave them to dry before applying Easihold.

There are two important factors for a suitable base for Easihold. Firstly, the base has to be stable enough to support the traffic it is to receive. And secondly, the base should be free draining. Easihold is a water-based product and will start to break down if left submerged underwater for long periods of time.

Pour On:
Easihold can be poured from a watering can. We recommend using a maximum of 1 litre per m2, ensuring your stones are evenly coated. Ensure you use a watering can with a steady flow that is dispersing the Easihold liquid evenly across the stones. 

This method is quite straightforward, without the use of specialist equipment and ensures good penetration into the stones.

The one main consideration with this method, and all methods of application of Easihold is over saturation. Easihold is air drying - application of excessive amounts of Easihold will leave the surface wet and unbonded. 

Spray On:
Easihold can be spray applied using a standard airless sprayer. For the spray application, you can double the coverage area of 1 litre of Easihold – covering up to 2 m2 per litre.

Spraying Easihold limits penetration into the base layer of the stones. Great for achieving a larger coverage but this method won’t provide as robust a surface finish. We would recommend this application method for decorative use only.

2 Coats:
We recommend to use 2 applications of Easihold when applying by the Pour On or Spray On method for the strongest finish. Ensure that the first coat has been allowed to fully dry - don't over-saturate! 

Sometimes pouring and spraying can risk splashing your paving, or surrounding areas. In these circumstances you can mix Easihold with your stones until they’re evenly coated – usually 2 litres is enough to coat a standard 25kg bag of stones. The mixing method leaves the strongest finish - guaranteeing the stones are evenly coated throughout.

You can typically only use this method of application with new stones - mixing with old, dirty stones could be difficult. 

Further Reading:
1. We STRONGLY recommend to read the FAQ's below on this page for further helpful advice. 
2. Please read our Easihold Blog for more helpful hints and tips. 
3. You can see more detailed information contained in our product datasheet and instruction book. 
4. We have an easy to understand Tutorial Video that we would recommend to view. 
5. Check our social media channels for Easihold - Easihold Instagram and Easihold Facebook

Resiseal is a repair and strengthening product. The efficacy of Resiseal depends upon the surface applied to. We cannot provide a warranty for this nature of installation, but we can assure you that Resiseal is an extremely high quality product. Please provide details of the project looking to be undertaken if you would like us to advise on life expectancy. 

Delivery is £4.99 + VAT for mainland UK.


What stones to Use with Easihold Stone Binder
What stones to Use with Easihold Stone Binder

Welcome to our blog post about what stones are best to use with our Easihold stone binder! We'll start with choosing

Shooting Our Easihold TV Advert for ITV1!
Shooting Our Easihold TV Advert for ITV1!

We had a fantastic time shooting our first TV commercial for Easihold! In this blog post, we'll post some outtakes, extra fo

Easihold Frequently Asked Questions (FAQ's)
Easihold Frequently Asked Questions (FAQ's)

Welcome to our Easihold Frequently Asked Questions post! We've taken these from our


More Information
Product Range Wonders of the World (Driveable)
Alternative Names WOTW Sample Case, Wonders of the World, Vuba Sample Case
Size Sample Case Containing 24 Aggregate Blends
Slip Resistance Value Available for each individual aggregate.
Los Angeles Coefficient Available for each individual aggregate.
Mixed Resin : Aggregate Ratio 7.5kg Mixed Resin to 100kg Aggregate (+ 6.25kg Fine Binding Aggregate for Vehicle Traffic)
Resin A : Isocyanate B Ratio Isocyanate is over indexed to a value of 1.4
Country of Manufacture United Kingdom
UV Resistance / Stability UV Stable.
Elongation at Break (%) Available for Resin Binder, Valtex.
Hardness (Shore D) Available for Resin Binder, Valtex.
Tensile Strength (MPa) 12.3 MPa
Gasoline/ Diesel Resistance Resistant.
Minimum Application Temp 5oC and Rising
Maximum Application Temp 30oC and Falling
Suitable Substrates Optimal Base - 40-60mm Open Grade Asphalt
Recommended Thickness 18mm for Vehicle Traffic and 15mm for Pedestrian Traffic
Curing Schedule Guide Leave to dry in good weather conditions for 48 hours after application.
Suitable Resin Binder Valtex Resin Binder 7.5kg
Brand Vuba
Coverage Rate Guidance 3.5m2 per Aggregate Blend @ 18mm Depth
Write Your Own Review

Let's see
your handy work! Leave
a review!

Please leave a review including photos! We love to hear from our customers, and see the fantastic projects they complete. You can also review us on Trust Pilot and Google! If you'd like your project to be seen by our staff or featured on our social media channels, please email in any images to jade.tyson@vubagroup.com.

Your Rating

Customer Photos

Videos including this product from Vuba...