MarbleBound Contractor Kit

Genuine Crushed Marble in a Resin Bound Contractor Kit Size
Size/Weight
Coverage Rate
Product Code
V-MB-001

Build Your Product

Select Kit Size (Edit)

This is a required field.

107.65kg Kit (4m2 @ 15mm)

Select Colour (Edit)

This is a required field.

£99.99 £119.99
(Trade Customer? Contact us for pricing!)
  • Buy 8 for £96.00 £115.20 save 4%
  • Buy 20 for £94.00 £112.80 save 6%
  • Buy 50 for £92.00 £110.40 save 8%
0.00

Kit Size

107.65kg Kit (4m2 @ 15mm)

0.00

Colour

Ronda 2-4mm

0.00

Colour

Segovia 2-4mm

0.00

Colour

Paloma Grey 0.4-6mm

0.00

Colour

Carrara Grey 0.4-6mm

0.00

Colour

Nero Grey 0.4-6mm

0.00

Colour

Catalonia 0.4-6mm

0.00

Colour

Manor Grey 0.4-6mm

0.00

Colour

Hardwick Castle 0.4-6mm

0.00

Colour

Girona 0.4-6mm

0.00

Colour

Ronda 0.4-6mm

0.00

Colour

Granada 0.4-6mm

0.00

Colour

Stony Island 0.4-6mm

0.00

Colour

Carrara Grey 2-4mm

0.00

Colour

Carrara Grey 4-6mm

0.00

Colour

Rojo 2-4mm

0.00

Colour

Paloma Grey 2-4mm

0.00

Colour

Paloma Grey 4-6mm

0.00

Colour

Nero Grey 2-4mm

0.00

Colour

Nero Grey 4-6mm

Marble Bound is a fantastic new Vuba Innovation! The MarbleBound kit consists of genuine marble aggregates, bound in a UV stable high quality resin binder. The ratio of UV resin binder to aggregates is an industry leading 7.5%. The kit consists of:

4 x 25kg MarbleBound Stones
1 x 7.5kg UV Stable High Quality Binder

UV Resin Total Kit Size = 107.5kg

The marble within MarbleBound has been recycled from off cuts of genuine marble during the manufacturing process of marble floor tiles and marble worktops. The genuine marble is then crushed, graded, cleaned and bagged ready to be included in your MarbleBound system. 

This 4 Bag Kit is designed to be mixed in a 100L or larger pan forced action mixer. 

Where can you use?
The Singular Aggregate Sizes (2-4mm or 4-6mm) are designed for domestic, or light duty foot traffic or other none vehicle traffic. The Blends (1-6mm) are a stronger matrix. The 1-6mm blend is our Marblebound HD system. This particular system can be used for surfaces that will endure parallel vehicle traffic (No turning of the wheels).

Our MarbleBound innovation has been hugely popular so far! Our customers have asked and asked for genuine grey colours, and now you have Marblebound! Check out our video here

Contractor? Why not request our Contractors Price List by emailing contractors@vubagroup.com, or calling 01482 778897 during office hours. You can view our contractor price list here

The kit consists of: 4 x 25kg MarbleBound Stones 1 x 7.5kg UV Stable High Quality Binder UV Resin Total Kit Size = 107.5kg

Installation thickness guidance is as follows: 

Domestic Foot Traffic = 15mm (Singular Stones or Blended) 
Commercial Foot Traffic = 18mm (1-6mm Blended Stones) 

For application on to the Vubagrid system, we would recommend an installation thickness of 18mm minimum. 

The application thicknesses are an advised minimum thickness throughout the system, you may require a greater thickness when applying on to undulated surfaces. 

The coverage rates at those thickness are:

15mm Thickness = 4m2
18mm Thickness =  3m2

The basic instructions for the application of the MarbleBound system are as follows:

1. MarbleBound must be installed on to a solid base. That could be primed concrete, asphalt / Tarmac, Vubagrid or other solid paving (contact us for more information).
2. Mix the UV Stable Resin Binder for 1 to 2 minutes, until fully mixed.
3. Pour the 4 x 25kg Bags of Aggregate into the Forced Action Mixer and allow to rotate. If using a blend you must ensure to pour into the mixer the correct aggregate bags per mix - check the instructions. 
4. Pour in the mixed resin and allow to fully blend for a further 90 seconds to 2 minutes.
5. Remove to a wheel barrow and cart to application area.
6. Set the thickness using a pin rake, a Rozzi sledge (Baby or Daddy) or lats.
7. Once set at the correct thickness (1-2mm above finished thickness), applying using a steel trowel to compact and finish the screed.
8. Allow to cure for 48 hours (temperature dependent).

Important Notice:
The date named by Vuba Supplies for delivery is given and intended as an estimate only and Vuba Supplies shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Delivery Time:
We send out all orders on a 24 hour service. The cut off point for same day dispatch is generally 12pm, so please contact us if ordering in the afternoon and require urgent dispatch. Some products may be made-to-order or out of stock and therefore take longer to process. In these instances you will be notified by telephone. 

UK Delivery Costs (Excl. VAT):
£0 - £100: £15.00
£100 - £250: £20.00
£250 - £500: £30.00
Over £500: FREE


Islands and N Ireland Delivery (Excl. VAT):
Add £5 for Isle of Wight (standard delivery)
Add £10 for Northern Ireland (standard delivery)
Add £25 for Scottish Highlands (standard delivery)
Add £30 for Scottish Offshore Islands & Channel Islands (standard delivery)
Add £65 for Isle of Man (standard delivery)

We can deliver to anywhere in the world from our factory in the UK. Please see our International Sites or email buildingproducts@vubagroup.com for a quotation.  


Insurance:
All deliveries are fully insured without additional charge to you.


Order Tracking:
Contact us on the specified delivery date in your order confirmation. For most orders we will send a tracking number with the order confirmation.

Write Your Own Review
You're reviewing:MarbleBound Contractor Kit
Your Rating

Video Tutorials