Free Delivery On orders over £500
Next Day Delivery In the UK
Trade Prices Available And Advice
Instant 0% Finance 98% Approval Rate
Credit Accounts In 24 Hours

Marble Effect 'Liquid Motion' Floor Coating Kit

In stock
Product Code :
V-VC-LM-001

This Marble Effect Floor Coating Kit gives you the opportunity to create something special with your floor! Unlike real marble, our epoxy coating can flow aroud corners and leave a completely seamless finish!

The Marble Effect Blends we have made (see swatches) are all based upon real marble finishes! These easy to use kits are possible for a DIY User or Contractor to try out this system with ease.

We supply the complete kit with all the components pre-measured. All you need to do is ensure the floor surface is prepared and primed, usually using our Epiprime primer, and you're ready to go!

Each 5 Litre kit contains 2 units, each of which contains 2 parts.

Unit 1: Contains Part A (Coloured Component) and Part B (Activator)
Unit 2: Contains Part A (Coloured Component) and Part B (Activator)

Each unit contains a contrasting colour. When applied together, the applicator can create a stunning marble effect finish from this epoxy coating.

Each 5 Litre kit will cover 10m2.

Coverage Guidance:
It is important to now over apply Liquid Motion (meaning apply to significantly less than 10m2) because when mixed together too thick on the floor, the colours can combine to form one uniform finish, which if occurs over a large area will take away from the finish.

We would always recommend priming the floor first before application of the marble effect designer floor coating. The reason is that if the substrate is overly absorbant in areas, the finish will potentially cure uneven as it absorbs more in areas.

Product Calculator
=

The Marble Effect Liquid Motion Floor Coating Kit is quite easy to apply! Achieving the marble effect is down to the artistic license of the applicator, but we can guide you through the process up to that point!

1) Ensure the surface to be applied on to is clean, dry and free from contamination.
2) The kit comes as 2 x 2.5 Litre units, each of which is 2 part. Separate the components out so you're sure of what it is you're mixing.
3) Each kit will have a Part A and a part B. The Part A contains the colour. Mix the Part B into the Part A tin.
4) Apply using a spatula and squeegee to spread the colours in a sporadic, random pattern, and once in place you can finish with the roller to create an even surface thickness. Mix the second colour contrasting Part A and Part B tin, and apply in conjunction with the first unit to create the marble effect!
5) You can apply a scratch resistant polyurethane resin sealer over the top for added protection, Duraseal.

£137.76 £114.80
(Buying a lot? Contact us for prices!)
0.00

Size

5 Litres

0.00

Colours

Blue Damasco

0.00

Colours

Carrara Marble

0.00

Colours

Cipollino Green

0.00

Colours

Cipollino Grey

0.00

Colours

Giallo Antico

0.00

Colours

Hymettus Marble

0.00

Colours

Noir Belge

0.00

Colours

Parian Marble

0.00

Colours

Red Verona

0.00

Colours

Rouge Griotte

Marble Effect 'Liquid Motion' Floor Coating Kit

Product Code :
V-VC-LM-001

This Marble Effect Floor Coating Kit gives you the opportunity to create something special with your floor! Unlike real marble, our epoxy coating can flow aroud corners and leave a completely seamless finish!

The Marble Effect Blends we have made (see swatches) are all based upon real marble finishes! These easy to use kits are possible for a DIY User or Contractor to try out this system with ease.

We supply the complete kit with all the components pre-measured. All you need to do is ensure the floor surface is prepared and primed, usually using our Epiprime primer, and you're ready to go!

Each 5 Litre kit contains 2 units, each of which contains 2 parts.

Unit 1: Contains Part A (Coloured Component) and Part B (Activator)
Unit 2: Contains Part A (Coloured Component) and Part B (Activator)

Each unit contains a contrasting colour. When applied together, the applicator can create a stunning marble effect finish from this epoxy coating.

Each 5 Litre kit will cover 10m2.

Coverage Guidance:
It is important to now over apply Liquid Motion (meaning apply to significantly less than 10m2) because when mixed together too thick on the floor, the colours can combine to form one uniform finish, which if occurs over a large area will take away from the finish.

We would always recommend priming the floor first before application of the marble effect designer floor coating. The reason is that if the substrate is overly absorbant in areas, the finish will potentially cure uneven as it absorbs more in areas.

Product Calculator
=

The Marble Effect Liquid Motion Floor Coating Kit is quite easy to apply! Achieving the marble effect is down to the artistic license of the applicator, but we can guide you through the process up to that point!

1) Ensure the surface to be applied on to is clean, dry and free from contamination.
2) The kit comes as 2 x 2.5 Litre units, each of which is 2 part. Separate the components out so you're sure of what it is you're mixing.
3) Each kit will have a Part A and a part B. The Part A contains the colour. Mix the Part B into the Part A tin.
4) Apply using a spatula and squeegee to spread the colours in a sporadic, random pattern, and once in place you can finish with the roller to create an even surface thickness. Mix the second colour contrasting Part A and Part B tin, and apply in conjunction with the first unit to create the marble effect!
5) You can apply a scratch resistant polyurethane resin sealer over the top for added protection, Duraseal.

Build Your Product

Select Size (Edit)

This is a required field.

5 Litres

Select Colours (Edit)

This is a required field.

Blue Damasco

Carrara Marble

Cipollino Green

Cipollino Grey

Giallo Antico

Hymettus Marble

Noir Belge

Parian Marble

Red Verona

Rouge Griotte

Pictorial Guide
More Information
Prod Name Vuba Liquid Motion - Marble Effect Floor Coating
Size 5kg
Composition Two Pack Epoxy Resin
Appearance Smooth, gloss, marble effect designer floor finish
Availability Standard 1-2 Days. Bespoke 3-5 days.
Durability Very Heavy Duty
Thickness High build 0.4mm to 1mm
Substrates Concrete, screeds, metals and asphalts etc
Ambient Temperature During application 5 degrees min.
Drying Time 24 hrs
Product Parts Two colours of Epoxy Resin and Activators
Primer Required No
Coverage Approximately 10m2 per kit
Typical Installations Domestic garages, hallways, utility rooms, commercial environments such as restaurants, bars, shops and more..

2005-2018 Vuba Supplies Limited, Venture Business Park, Hull, HU3 4EL. eCommerce by Icecube Digital