Epiprime - Epoxy Resin Two Part Primer
Epiprime is an Epoxy Resin Primer supplied in two pre-weighed components, ready to mix and apply.
Epiprime will penetrate and consolidate a substrate, as well as leave a film thickness. Epiprime is ideal for removing porosity and increasing strength of a substrate.
Epiprime provides a bonding surface to create a monolithic layer between the finishing coating or screed and the subfloor.
Epiprime is available as a 5kg Two Part Epoxy Primer Kit and covers 30m2 in one coat on to a standard concrete surface.
Build Your Product
This is a required field.
5 Litres (30m2)
you need to
Epiprime is an epoxy primer and sealer designed to seal and protect almost any surface. Epiprime can be used as a standalone product to prevent dusting, or as a primer to seal and prepare substrates ready to receive levelling screeds; paint coats or trowel applied resin bound screeds.
Epiprime is a low viscosity solvent free epoxy primer which is designed to absrob into the existing substrate, curing stronger than concrete itself, sealing effectively to prevent the potential of bubbling through to the final surface finish.
This epoxy primer will seal air pockets in the subfloor to prevent bubbles and pin holes in the final finish of your levelling screed or coating.
Epiprime can be applied and laid over whilst tacky to give an incredibly strong bond for resin mortars which have a dry mix.
This epoxy primer can be laid on to a smooth surface and seeded with a fine aggregate to provide a profiled surface, perfect to provide a mechanical key for any subsequent layers of coatings or screeds such as Resin Bound Surfacing.
Epiprime is supplied as a 5kg kit. The two parts are supplied pre-weighed ready to mix.
Each Kit will cover approximately 30m2 in one coat on a fairly good condidition substrate. A maximum of 40m2 could be achieved on the perfect surface, or as low as 1/2 of that on a profiled or uneven surface.
For garages and smaller areas, we would recommend allowing to 25m2 (for cutting in, roller absorption etc).
Epiprime should be applied on to a clean, dry surface which is free from contamination.
We recommend to apply Epiprime on to a mechanically prepared surface for optimal results. Suitable preparation would include acid etching, diamond grinding or shot blasting.
For resin bound surfacing, surface are typically prepared in the event of significant contamination preventing a bond between the epoxy primer and the genuine substrate.
Epiprime is supplied as two pre-weighed parts. Simply pour the Part B into the Part A and allow to mix for approximately 2 minutes until the liquids are mixed thoroughly.
Epiprime is applied using a brush and roller. Once the mixing has taken place, you should spread Epiprime from a scuttle. A Medium pile roller is typically most suitable, depending upon the application.
Epiprime cures from an exothermic reaction, so the more primer is kept in the same place like the tin, the less will be the pot life. Spread the primer out once it has mixed and begin cutting in / rolling
Once applied, allow Epiprime to cure for 12-16 hours at 20oC, and longer for colder temperatures.
Upon placing your order you will be sent an initial simple order confirmation - detailing the products ordered, addresses and contact details. Within 6 working hours, you will then receive a secondary order confirmation email. This email will detail arrival date, method and handy hints and tips for your order; along with instruction guides, datasheets and safety datasheets.
Deliveries less than 150kg will most likely arrive by parcel boxes. For deliveries over 150kg, it is likely they will arrive by pallet delivery. Pallet delivery vehicles will arrive equipped with a pallet truck and ability to offload the delivery.
Online orders received after 12pm will be counted in the following working day. Orders are processed on working days only. Delivery times are estimated in working days. You can call to arrange a Saturday Delivery.
Request Delivery Time:
To talk through your delivery, specify an arrival date or for urgent orders, please place your order via the telephone. Call us on 01482 778897.
The standard delivery time of this product is detailed when you input your post code. Contact us on 01482 778897 for time critical orders.
Returns are not generally accepted due to batching concerns (all orders are supplied are as part of a recorded batch). Contact us for more information, or view our returns policy.
How is it Calculated?
When you add products to your basket, you will be able to enter your post code and see your exact tailored delivery charge. Alternatively, you can view a schedule of our delivery charges here.
Delivery pricing is based upon the overall weight of your order, combined with the post code.
For very large orders, you can contact us for a specific delivery quote. And we have the following extra services available to request over the telephone:
AM Delivery = £15.00 / Order
Saturday Delivery = £50.00 / Order
More information is available on our delivery information page and by getting in touch with us. Either call 01482 778897 or email email@example.com.
Watch the Vuba Channel...
|Country of Manufacture||United Kingdom|
|Minimum Application Temp||5oC|
|Maximum Application Temp||25oC|
|Suitable Substrates||Concrete, Epoxy Resin, Plywood, Tiles, Paving|
|Recommended Thickness||200 microns|
|Curing Schedule Guide||12-16 Hours at 20oC|
a Genuine Review and we give
Leave a review here (including photos if you can) which will help potential customers choose if this is the right product for them, and we will give you £5 as a reward for your help! Also leave us a Trust Pilot or Google Review and we will upgrade you to £10
You will be contacted within 2 working days of submitting your review. You can choose an Amazon voucher or discount from your next order with Vuba. For more details you can email firstname.lastname@example.org.