Free Delivery On orders over £500
Next Day Delivery In the UK
Trade Prices Available And Advice
Instant 0% Finance 98% Approval Rate
Credit Accounts In 24 Hours

Vuba Flexible Rubber Resin Bound Kit - No Base Required (Resipath)

In stock
Product Code :
V-RP-129

Resipath is a 'direct to soil' all in one resin bound surfacing screed applied at 35mm thickness. Resipath comes in a 60kg Kit which contains all of the products pre-weighed and ready to mix. Reipath has a flexible, forgiving surface finish which makes it perfect for gardens and around the home! Resipath is a decorative alternative to play surfacing, whilst keeping the kerb appeal of resin bound surfacing and the low maintenance of resin systems in general. Each 101kg kit will cover 2.4m2 at 35mm, the prescribed thickness. Resipath is mixed using a large pan forced action mixer, which is available to hire from Vuba. Resipath is applied on to Type 1 or Type 3 Hardcore, perfect for when you are removing existing soil or unstable paving, and don't want to have to lay a concrete or Tarmac base. At 10oC, Resipath will take cure in 16 hours to walk on - it is supplied pre-catalysed for ease of use. Resipath has extremely high compressive strength but should not be used for vehicle traffic (turning). Vehicles can pass on Resipath without problem.

Each kit is supplied with the following:

1 x Resin (Pre-catalysed)
1 x Activator
1 x Dried Aggregates

The resin is supplied pre-catalysed to no requirement for additional mixing processes. The kit size is 26.625kg, and therefore will fit handily into most builders tubs. The kit can be mixed using a standard 'plasterers drill and paddle' - no requirement to hire a forced action mixer.

This handy DIY Resin Bound Kit is perfect for the DIY user or even professionals for smaller areas - no more messing around splitting units of resin bound on site. The coverage rates are as follows:

12mm = 1.25m2 per kit (Foot and Light Traffic)
15mm = 1m2 per kit (Vehicle Traffic)
18mm = 0.75m2 per kit (Very Heavy Vehicle Traffic)

To apply our Resipath rubber and stone cold lay base for resin bound surfacing, we recommend you follow these steps: Ensure the surface is well compacted Type 1 or Type 3 hardcore. Pour the recycled rubber, aggregate and kiln dried sand into the mixer and allow to blend. Add the Resibind polyurethane resin binder to the mix and allow to rotate for 2 minutes until the resin is completely dispersed wihin the aggregate blend. Pour out into place on the hardcore, and trowel apply to the desired thickness. Allow to cure for 24 hours before overlaying using our of our resin bound systems.

Special Price £81.87 £98.24
(Buying a lot? Contact us for prices!)
(Buying a lot? Contact us for prices!)
0.00

Colours

Black Granite Flex

0.00

Colours

Moroccan Gold Flex

0.00

Colours

Nordic Storm Flex

0.00

Colours

Olive and Fig Flex

0.00

Colours

Pecan and Walnut Flex

0.00

Colours

Red Galaxy Flex

0.00

Colours

Roman Piazza Flex

0.00

Colours

Siberian Wolf Flex

0.00

Colours

Venetian Stone Flex

0.00

Colours

Yorkshire Tweed Flex

0.00

Thickness

35mm

0.00

UV Stability

None UV Stable

24.00

UV Stability

UV Stable + £24.00

Vuba Flexible Rubber Resin Bound Kit - No Base Required (Resipath)

Product Code :
V-RP-129

Resipath is a 'direct to soil' all in one resin bound surfacing screed applied at 35mm thickness. Resipath comes in a 60kg Kit which contains all of the products pre-weighed and ready to mix. Reipath has a flexible, forgiving surface finish which makes it perfect for gardens and around the home! Resipath is a decorative alternative to play surfacing, whilst keeping the kerb appeal of resin bound surfacing and the low maintenance of resin systems in general. Each 101kg kit will cover 2.4m2 at 35mm, the prescribed thickness. Resipath is mixed using a large pan forced action mixer, which is available to hire from Vuba. Resipath is applied on to Type 1 or Type 3 Hardcore, perfect for when you are removing existing soil or unstable paving, and don't want to have to lay a concrete or Tarmac base. At 10oC, Resipath will take cure in 16 hours to walk on - it is supplied pre-catalysed for ease of use. Resipath has extremely high compressive strength but should not be used for vehicle traffic (turning). Vehicles can pass on Resipath without problem.

To apply our Resipath rubber and stone cold lay base for resin bound surfacing, we recommend you follow these steps: Ensure the surface is well compacted Type 1 or Type 3 hardcore. Pour the recycled rubber, aggregate and kiln dried sand into the mixer and allow to blend. Add the Resibind polyurethane resin binder to the mix and allow to rotate for 2 minutes until the resin is completely dispersed wihin the aggregate blend. Pour out into place on the hardcore, and trowel apply to the desired thickness. Allow to cure for 24 hours before overlaying using our of our resin bound systems.

Build Your Product

Thickness (Edit)

This is a required field.

35mm

Select Colours (Edit)

This is a required field.

Black Granite Flex

Moroccan Gold Flex

Nordic Storm Flex

Olive and Fig Flex

Pecan and Walnut Flex

Red Galaxy Flex

Roman Piazza Flex

Siberian Wolf Flex

Venetian Stone Flex

Yorkshire Tweed Flex

UV Stability (Edit)

This is a required field.

None UV Stable

UV Stable + £24.00

More Information
Size 101kg

Video Tutorials

YOU MIGHT ALSO LIKE...
Guaranteed 24 Hour Answer
Have a Question?
  • Thank you for submitting your query!

    We will do our best to handle and respond to it as soon as possible.

2005-2018 Vuba Building Products Limited, Units B3-B4, Grovehill Industrial Estate, Beverley, HU17 0LF. eCommerce by Icecube Digital