Free Delivery On orders over £500
Next Day Delivery In the UK
Trade Prices Available And Advice
Instant 0% Finance 98% Approval Rate
Credit Accounts In 24 Hours

Resin Bound Trade Non-UV (4m2 Kit)

In stock
Product Code :
V-VS-RSLK-0011

The Vuba Trade Non-UV Kit is a popular kit for applying resin bound screeds. The delivered price starts at £12.83 + VAT per m2 for a 12mm screed when ordering more than £500.

The Trade Non-UV Kit is an easy to use pre-weighed set of components made for applying a high quality resin bound screed.

This kit is perfect for landscapers, builders or any tradesman looking for a great price on a great product.

This trade resin bound kit is completely permeable, complying with SUDS regulations.
The resin is manufactured under strict quality control guidelines.
You will be supported with expert technical advice, easy to understand product labeling and professional tutorial videos

Collection is available from our warehouse, with further discounts available. Contact us if you would like to know our special Contractor Collection Rates.

Each resin bound contractor kit weighs 106kg and is supplied with the following:

1 x Non-UV Resin (Pre-catalysed)
1 x Activator
4 x Bags of Dried Aggregates

The resin is supplied pre-catalysed, therefore no requirement for additional mixing processes. The kit size is 106kg, designed for a large pan forced action mixer. The aggregates are supplied in 4 washed and dried bags.

The coverage rates are as follows:

12mm = 5m2 per kit (Foot and Light Traffic)
15mm = 4m2 per kit (Vehicle Traffic)
18mm = 3m2 per kit (Very Heavy Vehicle Traffic)

Mixing and apply our Trade Resin Bound Kit is quite straightforward. We send out an installation pamphlet with each order, and more information is available in our Vuba Youtube Channel Guides, and product datasheets. However, see a brief description below:

1) Ensure the surface is clean, dry and free from contamination. Mark out the coverage of each kit that you would like to achieve against a marker, such as a placing a piece of tape at certain points along a wall.
2) Mix the two part resin component separately until fully homogenous. This process should take 90 secons to 2 minutes.
3) Whilst you are mixing the resin, place the aggregate bags in a large pan forced action mixer and allow to rotate. Only let to rotate in a short period of time before adding the resin, excessive rotation of the aggregate will cause the stone to be 'ground down' which will release a dust. The dust will discolour the mix.
4) Pour the resin over the stones and begin to mix in the large pan forced action mixer. Allow to mix for approximately 2 minutes, depending upon the size and power of the mixer. Mixing times must be consistent and not too excessive, in order to prevent discolouration of the mix.
5) Ensure that the mixer is cleaned between mixes, and that the mixer is fully cleaned at the end of the day.

£64.13 £76.96
(Buying a lot? Contact us for prices!)
(Buying a lot? Contact us for prices!)
0.00

Size

106.5kg (4m2 at 15mm)

7.48

Individual Swatches

Amber Gold 1-4mm +£3.98

0.28

Individual Swatches

Apothecary Red 1-3mm +£0.23

0.28

Individual Swatches

Apothecary Red 2-5mm +£0.23

127.68

Individual Swatches

Arctic White 1-3mm +£106.40

9.19

Individual Swatches

Autumn Quartz 1-3mm +£7.66

9.19

Individual Swatches

Autumn Quartz 2-5mm +£7.66

10.03

Individual Swatches

Autumnal Mill 1-5mm +£8.36

12.28

Individual Swatches

Black 1-3mm +£10.23

1.51

Individual Swatches

Black 2-5mm +£1.26

4.32

Individual Swatches

Black Granite 1-5mm +£3.60

8.29

Individual Swatches

Britanny Bronze 1-3mm +£6.91

8.29

Individual Swatches

Britanny Bronze 2-5mm +£6.91

4.30

Individual Swatches

Canadian Spruce 1-5mm +£3.58

9.19

Individual Swatches

Celtic Plumb 1-3mm +£7.66

25.37

Individual Swatches

Classic 1-3mm Bound +£21.14

2.26

Individual Swatches

Corn Flint-2-5mm +£2.26

13.30

Individual Swatches

Danish Quartz 2-5mm +£11.08

13.30

Individual Swatches

Danish Quartz-1-3mm +£11.08

7.61

Individual Swatches

Devon Yellow 2-5mm +£6.34

7.48

Individual Swatches

Dorset Gold 2-5mm +£6.23

8.33

Individual Swatches

Dubai Sunrise 1-5mm +£6.94

5.08

Individual Swatches

Golden Quartz 2-5mm +£4.23

11.76

Individual Swatches

Himalayan Mist 1-5mm +£9.80

7.09

Individual Swatches

Icelandic Volanco 1-5mm +£5.91

10.49

Individual Swatches

King Silver 1-3mm +£8.74

10.49

Individual Swatches

King Silver 2-5mm +£8.74

9.19

Individual Swatches

Laurel Green 1-3mm +£7.66

6.91

Individual Swatches

Maple Fall 1-5mm +£5.76

10.13

Individual Swatches

Mayan Temple 1-5mm +£8.44

9.44

Individual Swatches

Moroccan Gold 1-5mm +£7.87

18.31

Individual Swatches

Natural Beige 2-5mm +£15.26

11.00

Individual Swatches

Nordic Storm 1-5mm +£9.17

4.68

Individual Swatches

Olive and Fig 1-5mm +£3.90

7.48

Individual Swatches

Pecan and Walnut 1-5mm +£6.23

11.76

Individual Swatches

Red Galaxy 1-5mm +£9.80

4.69

Individual Swatches

Roman Piazza 1-5mm +£3.91

4.64

Individual Swatches

Siberian Wolf 1-5mm +£3.87

7.13

Individual Swatches

Silver Blue 1-3mm +£5.94

0.61

Individual Swatches

Silver Blue 2-5mm +£0.51

10.49

Individual Swatches

Silver Highland 1-5mm £8.74

11.93

Individual Swatches

Spanish Jerez 1-3mm +£9.94

9.19

Individual Swatches

Venetian Stone 1-5mm +£7.66

12.53

Individual Swatches

Village Pavilion 1-5mm +£10.44

10.21

Individual Swatches

Winter Quartz 1-3mm +£8.51

10.21

Individual Swatches

Winter Quartz 2-5mm +£8.51

7.08

Individual Swatches

York Acorn 1-5mm +£5.90

10.80

Individual Swatches

Yorkshire Tweed 1-5mm +£9.00

0.00

UV STABILITY

Non UV Stable (Will discolour with any sunlight)

6.00

SLIP RESISTANCE

0.5kg Anti Slip Additive (For Inclines. hills etc) +£6.00

0.00

SLIP RESISTANCE

Standard Aggregated Finish

Resin Bound Trade Non-UV (4m2 Kit)

Product Code :
V-VS-RSLK-0011

The Vuba Trade Non-UV Kit is a popular kit for applying resin bound screeds. The delivered price starts at £12.83 + VAT per m2 for a 12mm screed when ordering more than £500.

The Trade Non-UV Kit is an easy to use pre-weighed set of components made for applying a high quality resin bound screed.

This kit is perfect for landscapers, builders or any tradesman looking for a great price on a great product.

This trade resin bound kit is completely permeable, complying with SUDS regulations.
The resin is manufactured under strict quality control guidelines.
You will be supported with expert technical advice, easy to understand product labeling and professional tutorial videos

Collection is available from our warehouse, with further discounts available. Contact us if you would like to know our special Contractor Collection Rates.

Each resin bound contractor kit weighs 106kg and is supplied with the following:

1 x Non-UV Resin (Pre-catalysed)
1 x Activator
4 x Bags of Dried Aggregates

The resin is supplied pre-catalysed, therefore no requirement for additional mixing processes. The kit size is 106kg, designed for a large pan forced action mixer. The aggregates are supplied in 4 washed and dried bags.

The coverage rates are as follows:

12mm = 5m2 per kit (Foot and Light Traffic)
15mm = 4m2 per kit (Vehicle Traffic)
18mm = 3m2 per kit (Very Heavy Vehicle Traffic)

Mixing and apply our Trade Resin Bound Kit is quite straightforward. We send out an installation pamphlet with each order, and more information is available in our Vuba Youtube Channel Guides, and product datasheets. However, see a brief description below:

1) Ensure the surface is clean, dry and free from contamination. Mark out the coverage of each kit that you would like to achieve against a marker, such as a placing a piece of tape at certain points along a wall.
2) Mix the two part resin component separately until fully homogenous. This process should take 90 secons to 2 minutes.
3) Whilst you are mixing the resin, place the aggregate bags in a large pan forced action mixer and allow to rotate. Only let to rotate in a short period of time before adding the resin, excessive rotation of the aggregate will cause the stone to be 'ground down' which will release a dust. The dust will discolour the mix.
4) Pour the resin over the stones and begin to mix in the large pan forced action mixer. Allow to mix for approximately 2 minutes, depending upon the size and power of the mixer. Mixing times must be consistent and not too excessive, in order to prevent discolouration of the mix.
5) Ensure that the mixer is cleaned between mixes, and that the mixer is fully cleaned at the end of the day.

Build Your Product

Select Size (Edit)

This is a required field.

106.5kg (4m2 at 15mm)

Individual Swatches (Edit)

This is a required field.

Amber Gold 1-4mm +£3.98

Apothecary Red 1-3mm +£0.23

Apothecary Red 2-5mm +£0.23

Arctic White 1-3mm +£106.40

Autumn Quartz 1-3mm +£7.66

Autumn Quartz 2-5mm +£7.66

Autumnal Mill 1-5mm +£8.36

Black 1-3mm +£10.23

Black 2-5mm +£1.26

Black Granite 1-5mm +£3.60

Britanny Bronze 1-3mm +£6.91

Britanny Bronze 2-5mm +£6.91

Canadian Spruce 1-5mm +£3.58

Celtic Plumb 1-3mm +£7.66

Classic 1-3mm Bound +£21.14

Corn Flint-2-5mm +£2.26

Danish Quartz 2-5mm +£11.08

Danish Quartz-1-3mm +£11.08

Devon Yellow 2-5mm +£6.34

Dorset Gold 2-5mm +£6.23

Dubai Sunrise 1-5mm +£6.94

Golden Quartz 2-5mm +£4.23

Himalayan Mist 1-5mm +£9.80

Icelandic Volanco 1-5mm +£5.91

King Silver 1-3mm +£8.74

King Silver 2-5mm +£8.74

Laurel Green 1-3mm +£7.66

Maple Fall 1-5mm +£5.76

Mayan Temple 1-5mm +£8.44

Moroccan Gold 1-5mm +£7.87

Natural Beige 2-5mm +£15.26

Nordic Storm 1-5mm +£9.17

Olive and Fig 1-5mm +£3.90

Pecan and Walnut 1-5mm +£6.23

Red Galaxy 1-5mm +£9.80

Roman Piazza 1-5mm +£3.91

Siberian Wolf 1-5mm +£3.87

Silver Blue 1-3mm +£5.94

Silver Blue 2-5mm +£0.51

Silver Highland 1-5mm £8.74

Spanish Jerez 1-3mm +£9.94

Venetian Stone 1-5mm +£7.66

Village Pavilion 1-5mm +£10.44

Winter Quartz 1-3mm +£8.51

Winter Quartz 2-5mm +£8.51

York Acorn 1-5mm +£5.90

Yorkshire Tweed 1-5mm +£9.00

UV STABILITY (Edit)

This is a required field.

Non UV Stable (Will discolour with any sunlight)

SLIP RESISTANCE (Edit)

This is a required field.

0.5kg Anti Slip Additive (For Inclines. hills etc) +£6.00

Standard Aggregated Finish

Pictorial Guide
More Information
Prod Name Vuba Resin Bound Superior - Full Kit
Size 106.5 Kg Kit
Composition 2 Component Resin and 4 x 25kg Aggregate
Appearance Aggregated Smooth Trowel Finish
Availability Next Day Delivery (Contact to confirm availability prior to ordering if urgent)
Durability Heavy Duty
Thickness 12mm to 20mm
Substrates Tarmac, Concrete, Screeds, Vuba Cellular Base, Vuba Base Screed (Contact us for further guidance)
Ambient Temperature 5oC to 25oC
Drying Time 4-8 Hours Pedestriaan and 16-24 Hours Vehicle (Highly Temperature Dependent)
Product Parts Two parts (resin & activator) and 4 x 25kg Aggregate Bags
Primer Required Primer not required for Tarmac. Primer required for Concrete and Cement based screeds.
Technical Data Refer to our Product Datasheets for more information
Coverage 5m2 at 12mm, 4m2 at 15mm, 3m2 at 18mm.
Typical Installations Resin bound driveways, pathways, landscapes and commercial projects.

Video Tutorials

2005-2018 Vuba Supplies Limited, Units B3-B4, Grovehill Industrial Estate, Beverley, HU17 0LF. eCommerce by Icecube Digital